How-to-use & FAQs

  • Functions

  • How to

  • FAQs

Manual & Automatic Modes

Press the Middle button to use the device on manual mode. Please note due to the safety detection tech the device will only flash when contact is made. If you hold in the middle button it will switch to auto mode and then you can glide the device along your body to help speed up the process (perfect for larger areas such as your legs).

 

Change Intensity Levels 

Press the Side button to toggle between intensity levels. You should be able to see the display light up from 1 to 9 depending on the intensity. 

It is recommended to always begin at the lower intensity levels and work your way up. (The Side button also turns on and off the device when held for 2 seconds)

Ice-Cooling Function

Press Both buttons together to turn ON the Ice-Cooling mode which will help to ensure a pain-free experience.

You will see the light turn on and the area around the IPL window will get cold. 

STEP ONE

Firstly, prepare your skin by removing hair from your desired area (shaving, waxing etc.) ensuring that the area is clean and dry. If you wax, you may want to wait 24 hours before treatment as your skin may be sensitive.

STEP TWO

Plug your device into a power outlet and turn it on by holding the SIDE button for 2 seconds. 
 

STEP THREE

To activate the ICE COOLING mode, press both buttons together for 2 seconds. You will see the light turn on, and the laser window will get cold. This will help ensure a pain-free experience. 

STEP FOUR

There are 9 levels of intensity - press the SIDE button to toggle between the intensity levels. It is recommended to always begin at the lower intensity levels and work your way up. Remember to wear your safety glasses and avoid using the device near your eyes. 

STEP FIVE

Place the device at a 90-degree angle to your skin, ensuring the laser window is making direct contact with your skin. N.B. do not target the same area twice.

 

Press the MIDDLE button to use the device on manual mode when in contact with skin. Please note, due to the safety tech, the device will only flash when in contact with your skin. 

 

To speed up the process, activate the automatic mode by holding the MIDDLE button for 2 seconds - you can then glide it along your target areas (perfect for larger surfaces e.g. legs) and it will automatically flash.

STEP SIX

All done! Once you've completed your session, clean your device by wiping your laser window with a dry cloth and ensure you apply moisturizer to all treated areas. It is recommended to avoid direct sun exposure for 24 hours after treatment, but if you are going out, ensure you have applied sunscreen.

Can I use the Velvet Pro 3 on tattoos, blemishes, scars or moles?

No it's advised not to use it on any of  the above. We always recommend checking with a dermatologist or doctor first.

Where can I use Velvet Pro 3?

You can use the Velvet Pro 3 below the cheeks to your toes......yes including your bikini area. 

Some areas may be more sensitive than others so ensure you turn on the Ice Cooling and adjust the intensity as desired. 

N.B: Avoid the eyes and wear the protective glasses provided.

How long on average does a full body session take with Velvet Pro 3?

See the picture below, it's less than 30 minutes!

What about tanning / fake tans?

You should wait to until your tan is gone. If you want to speed up the process of getting rid of your fake tan, try exfoliating using  our Glam Glove. Also, the best practice is to avoid tanning and sunbathing for a minimum of two weeks after a treatment.

How often should I use the Velvet Pro 3?

For weeks 1 to 4 - three times per week.

For weeks 5 to 8 - two times per week.

For weeks 9 to 12 - one time per week

After this touch ups may be done as required.

Do I need to shave before using the Velvet Pro 3?

You need to use IPL on hairless skin to effectively target the roots and prevent burns. If shaving, you can use the Velvet Pro 3 immediately, however, if waxing, please wait 24 hours before treatment.

Can I use the Velvet Pro 3 if I am pregnant?

No. You should not be undergoing IPL hair removal if you are pregnant.

Does the Velvet Pro 3 hurt?

Our Ice-cooling technology helps to ensure a pain-free experience, even on those sensitive areas.

Who can use the Velvet Pro 3?

Refer to this table below to see if the Velvet Pro 3 works for  you! 

  • Functions

  • How to

  • FAQs

Manual & Automatic Modes

Press the Middle button to use the device on manual mode. Please note due to the safety detection tech the device will only flash when contact is made. If you hold in the middle button it will switch to auto mode and then you can glide the device along your body to help speed up the process (perfect for larger areas such as your legs).

 

Ice-Cooling Function

Press Both buttons together to turn ON the Ice-Cooling mode which will help to ensure a pain-free experience.

You will see the light turn on and the area around the IPL window will get cold. 

Change Intensity Levels 

Press the Side button to toggle between intensity levels. You should be able to see the display light up from 1 to 9 depending on the intensity. 

It is recommended to always begin at the lower intensity levels and work your way up. (The Side button also turns on and off the device when held for 2 seconds)

STEP TWO

Plug your device into a power outlet and turn it on by holding the SIDE button for 2 seconds. 

 

 

 

 

 

 

 

 

 

STEP FOUR

There are 9 levels of intensity - press the SIDE button to toggle between the intensity levels. It is recommended to always begin at the lower intensity levels and work your way up. Remember to always wear your safety glasses and avoid using the device near your eyes. 




STEP SIX

All done! Once you've completed your session, clean your device by wiping your laser window with a dry cloth and ensure you apply moisturizer to all treated areas. It is recommended to avoid direct sun exposure for 24 hours after treatment, but if you are going out, ensure you have applied sunscreen.

STEP ONE

Firstly, prepare your skin by removing hair from your desired area (shaving, waxing etc.) ensuring that the area is clean and dry. If you wax, you may want to wait 24 hours before treatment as your skin may be sensitive.

STEP THREE

To activate the ICE COOLING mode, press both buttons together for 2 seconds. You will see the light turn on, and the laser window will get cold. This will help ensure a pain-free experience. 

STEP FIVE

Place the device at a 90-degree angle to your skin, ensuring the laser window is making direct contact with your skin. N.B. do not target the same area twice.

 

Press the MIDDLE button to use the device on manual mode when in contact with skin. Please note, due to the safety tech, the device will only flash when in contact with your skin. 

 

To speed up the process, activate the automatic mode by holding the MIDDLE button for 2 seconds - you can then glide it along your target areas (perfect for larger surfaces e.g. legs) and it will automatically flash.

Can I use the Velvet Pro 3 on tattoos, blemishes, scars or moles?

No it's advised not to use it on any of  the above. We always recommend checking with a dermatologist or doctor first.

Where can I use Velvet Pro 3?

You can use the Velvet Pro 3 below the cheeks to your toes......yes including your bikini area. 

Some areas may be more sensitive than others so ensure you turn on the Ice Cooling and adjust the intensity as desired. 

N.B: Avoid the eyes and wear the protective glasses provided.

How long on average does a full body session take with Velvet Pro 3?

See the picture below, it's less than 30 minutes!

What about tanning / fake tans?

You should wait to until your tan is gone. If you want to speed up the process of getting rid of your fake tan, try exfoliating using  our Glam Glove. Also, the best practice is to avoid tanning and sunbathing for a minimum of two weeks after a treatment.

How often should I use the Velvet Pro 3?

For weeks 1 to 4 - three times per week.

For weeks 5 to 8 - two times per week.

For weeks 9 to 12 - one time per week

After this touch ups may be done as required.

Do I need to shave before using the Velvet Pro 3?

You need to use IPL on hairless skin to effectively target the roots and prevent burns. If shaving, you can use the Velvet Pro 3 immediately, however, if waxing, please wait 24 hours before treatment.

Can I use the Velvet Pro 3 if I am pregnant?

No. You should not be undergoing IPL hair removal if you are pregnant.

Does the Velvet Pro 3 hurt?

Our Ice-cooling technology helps to ensure a pain-free experience, even on those sensitive areas.

Who can use the Velvet Pro 3?

Refer to this table below to see if the Velvet Pro 3 works for  you! 

Are you ready for flawless, glowing skin?

Shop Now

Rose Infinity

$299.95

PRE-ORDER ROSE INFINITY